Automotive · R&D project · Trade press (Korean)
Jenex at Daese (Haman, Korea): AI vision measures automotive spring end finishing and auto-rejects out-of-spec parts (demonstration)
| Company / plant | Daese Co. spring production line, Haman County, Gyeongnam (South Korea) |
|---|---|
| Defect type | Out-of-spec end machining (finished width and shape at both spring ends) |
| Part | Automotive springs (both ends) |
| Material | Not stated in source |
| Vendor | Jenex |
| Camera / lighting | Two cameras image both spring ends at the same time; cameras and inspection unit added to the existing line |
| Training data | About 42,000 pairs of spring inspection images from Daese |
| Reported result (quoted) | No results yet. Stated targets: throughput from about 1,000 to 3,000 parts per hour, under 0.8 seconds per part, and defect-judgment accuracy of 99.8% or higher. Performance is to be verified by TTA (Telecommunications Technology Association) testing. Previously, workers checked the parts by eye. |
| Notes | Maeil Business Newspaper (mk.co.kr), Nov 9, 2026, in Korean, based on Jenex's Nov 7 announcement. Demonstration runs through end of November 2026 under a Ministry of Science and ICT / NIPA manufacturing-AI program run by Gyeongsangnam-do and Gyeongnam Technopark; not yet in production. The AI measures the finished width and shape; out-of-spec parts are separated from the line automatically and results are stored in the production management system. Jenex plans to extend it to other Daese lines and later to bearings and shafts. |
| Defect categories | Casting & machining |
| Source | https://www.mk.co.kr/news/business/12202707 |
Results are quoted from the source. Vendor-published results are vendor claims and were not independently verified. Spot an error? Contact us.